제품소개
|
|
수평의
|
수직의
|
|
재료
|
텅스텐 카바이드
|
텅스텐 카바이드
|
|
TPI
|
15-50mm
|
13-60mm
|
|
신청
|
목재
|
목재
|
|
길이
|
3500-12000mm
|
3500-15000mm
|
|
두께
|
0.7-1.5mm
|
0.7-1.67mm
|
|
너비
|
27-150mm
|
15-260mm
|
|
새기다
|
1.3-3.0mm
|
1.3-3.2mm
|
|
유형
|
목공
|
목공
|
|
메모: 맞춤형 서비스 가능
|
Possible Problems & Solutions
PROBLEM :The surface of the cut board is uneven and deviatesREASON①: Deformation of the wheel surface
PREVENT/SOLVE①: the saw blade rubs against the wheel surface for a long time, and the wheel surface is not trimmed
REASON②: Rolling treatment is not good
PREVENT/SOLVE②: problems in the production of saw blades
REASON③: Angle mismatch
PREVENT/SOLVE③: production process problem, provide specific gravity of cut wood to production
REASON④: The knife
edge is not sharp
PREVENT/SOLVE④: it has not been ground for a long time
REASON⑤: Improper clamp (head) adjustment
PREVENT/SOLVE⑤: excessive clamp clearance
PROBLEM: Saw Blade crackedREASON①: Material Issues PREVENT/SOLVE①:Production Issues
REASON②:The knife edge is not sharp and the resistance is too large PREVENT/SOLVE②:the single use time is determined according to different materials to be cut
REASON③:Tooth profile mismatch PREVENT/SOLVE③:production problem
REASON④:Repair Grinding Cause PREVENT/SOLVE④:Incorrect Grinding
REASON⑤:Bad rolling handling PREVENT/SOLVE⑤:production problem
REASON⑥:Improper blade cooling PREVENT/SOLVE⑥:not cooling properly, or not cooling the bladeproperly
PROBLEM: Saw Blade breakREASON①: Material reason PREVENT/SOLVE①:production problem
REASON②:The knife edge is not sharp, and it has :been used for too long,and the resistance is too large PREVENT/SOLVE②: grind it on time
REASON③:The saw blade is rubbing against the equipment PREVENT/SOLVE③:adjust until the saw blade fits perfectly with the equipment
REASON④:Too much tension PREVENT/SOLVE④:choose thecorresponding tension according to the width and thickness of the saw blade
REASON⑤:The feed speed does not match
PREVENT/SOLVE⑤:according to the cutting of different wood, give the corresponding feed speed
REASON⑥:Human factors PREVENT/SOLVE⑥:wood ash notcleaned in time, grinding is not precise enough, manual feeding speed is uneven, key parts of the machine are regularly lubricated
포장 & 배송
회사소개
왜 우리를 선택 했습니까
연락처 정보
|
담당자
|
엠마
|
|
WhatsApp/전화번호
|
+86 13825289615
|
|
위챗
|
DH커터
|
|
이메일 계정
|
관련 상품
리뷰
아직 리뷰가 없습니다.