Industrial Sawmill Wood Log Sawing Pine Carbide Tipped Bandsaw Hardwood Mahogany Redwood Cutting Band Saw Blades
Predstavitev izdelka
Predstavitev izdelka
|
Vodoravno
|
Navpično
|
Material
|
volframov karbid
|
volframov karbid
|
TPI
|
15-50mm
|
13-60mm
|
Aplikacija
|
Les
|
Les
|
Dolžina
|
3500-12000mm
|
3500-15000mm
|
Debelina
|
0.7-1.5mm
|
0.7-1.67mm
|
Premer
|
27-150mm
|
15-260mm
|
Izrezljaj
|
1.3-3.0mm
|
1.3-3.2mm
|
Vrsta
|
Lesarstvo
|
Lesarstvo
|
Opomba: Na voljo prilagojena storitev
|
Možne težave & Rešitve
TEŽAVA :The surface of the cut board is uneven and deviatesREASON①: Deformation of the wheel surface
PREVENT/SOLVE①: the saw blade rubs against the wheel surface for a long time, and the wheel surface is not trimmed
REASON②: Rolling treatment is not good
PREVENT/SOLVE②: problems in the production of saw blades
REASON③: Angle mismatch
PREVENT/SOLVE③: production process problem, provide specific gravity of cut wood to production
REASON④: The knife
edge is not sharp
PREVENT/SOLVE④: it has not been ground for a long time
REASON⑤: Improper clamp (head) adjustment
PREVENT/SOLVE⑤: excessive clamp clearance
TEŽAVA: Saw Blade crackedREASON①: Material Issues PREVENT/SOLVE①:Production Issues
REASON②:The knife edge is not sharp and the resistance is too large PREVENT/SOLVE②:the single use time is determined according to different materials to be cut
REASON③:Tooth profile mismatch PREVENT/SOLVE③:production problem
REASON④:Repair Grinding Cause PREVENT/SOLVE④:Incorrect Grinding
REASON⑤:Bad rolling handling PREVENT/SOLVE⑤:production problem
REASON⑥:Improper blade cooling PREVENT/SOLVE⑥:not cooling properly, or not cooling the bladeproperly
TEŽAVA: Saw Blade breakREASON①: Material reason PREVENT/SOLVE①:production problem
REASON②:The knife edge is not sharp, and it has :been used for too long,and the resistance is too large PREVENT/SOLVE②: grind it on time
REASON③:The saw blade is rubbing against the equipment PREVENT/SOLVE③:adjust until the saw blade fits perfectly with the equipment
REASON④:Too much tension PREVENT/SOLVE④:choose thecorresponding tension according to the width and thickness of the saw blade
REASON⑤:The feed speed does not match
PREVENT/SOLVE⑤:according to the cutting of different wood, give the corresponding feed speed
REASON⑥:Human factors PREVENT/SOLVE⑥:wood ash notcleaned in time, grinding is not precise enough, manual feeding speed is uneven, key parts of the machine are regularly lubricated
Pakiranje & Dostava
Predstavitev podjetja
Zakaj izbrati nas
Kontaktni podatki
Kontaktna oseba
|
Emma
|
WhatsApp/telefonska številka
|
+86 13825289615
|
WeChat
|
DHcutter
|
E-poštni račun
|
Podobni izdelki
List za tračno žago
|
List krožne žage
|
Končni rezkar
|
Sveder
|
Rezalnik prstnih sklepov
|
Spiralni spiralni rezalnik
|
Rezalna glava
|
Skobeljni nož
|
Brusilno kolo
|
Lesnoobdelovalni stroj
|
Ocene
Ni še nobene ocene.