Wakati wa matumizi ya mashine ya bandsaw ya kuni, kushindwa fulani kunaweza kutokea mara nyingi. Nakala hii itaelezea kwa ufupi shida ya kawaida ya kutofaulu, bendi iliona kuvunjika kwa blade. Itakuonyesha sababu za kawaida za kuvunjika kwa blade ya bandsaw na vidokezo vitatu vya jinsi ya kukabiliana na matatizo haya.
Wakati mashine ya msumeno wa kuni inafanya kazi, bendi iliona vile vile kusonga mbele na nyuma, na kuna matukio yasiyo ya kawaida kama vile kupasuka kwa sauti. Kwa kesi hii, blade ya bandsaw inawezekana kuwa na nyufa. Tunapaswa kuacha kazi ya mashine mara moja na kuangalia.
Kuvunjika kwa blade ya bendi kwa ujumla hutokea kwa sababu zifuatazo:
Kwanza, fikiria kuvunjika kwa vile vya bandsaw vinavyosababishwa na matatizo ya mashine ya bandsaw yenyewe: vibration ya mashine ya bandsaw husababisha kuvaa kwa fani, ambayo nayo husababisha vile vile vya msumeno kukatika; tunapaswa kuimarisha chombo cha mashine na kuchukua nafasi ya fani na mpya ili kuhakikisha uendeshaji thabiti wa mashine ya bandsaw..
Pili, fikiria kuvunjika kulikosababishwa na blade ya bendi yenyewe: excessive or too small tension of the band saw blades during the cutting process will cause the bandsaw blades to break; when using it, we should consider different machine conditions and materials that need to be cut. Adjust the appropriate tension of the band saw blades in time.
Wakati huo huo, if the band saw blade is used for too long, the saw teeth will not be sharp, and the lack of power during the cutting process will also cause the bandsaw blades to break. The correct response is to use a gear grinder to sharpen the saw teeth of the bandsaw blade and grind it according to the wood. The hardness adjusts the working time of the bandsaw blades.
Third, consider the band saw blade breakage caused by operating reasons: excessive feed speed during the use of the bandsaw machine will also cause the bandsaw blades to break; the correct feed speed should be changed flexibly according to the specific situation, and the material should be fed smoothly to allow the bandsaw blades to break. The saw blade operates normally.
Zaidi ya hayo, if there is resin on the saw teeth, causing thick wood chips to stick to the bandsaw blades, the band saw blades will also break. Especially when cutting oily wood, you need to pay special attention to avoid wood chips sticking to the saw teeth and causing the bandsaw blades to break.
If you encounter a broken bandsaw blade when using a wood working bandsaw machine, you can troubleshoot according to the above article and make timely adjustments.
Ikiwa unahitaji vile vile vya mbao vya ubora wa juu vya kufanya kazi, tafadhali wasiliana nasi kwenye tovuti ya DH kwa maelezo zaidi.