Horizontal Machine Log Sawing Blades Wood Mill Custom Carbon Lumber Sawmill Band Saw Blade for Wood Cutting
Introducción le producto
Introducción le producto
|
Horizontales
|
Verticales
|
Xooko'obo'
|
Carburo tungsteno
|
Carburo tungsteno
|
Tpi
|
15-50milímetro
|
13-60milímetro
|
Ka'anatako'ob
|
Che'
|
Che'
|
Largura
|
3500-12000milímetro
|
3500-15000milímetro
|
Espesor
|
0.7-1.5milímetro
|
0.7-1.67milímetro
|
Kóoch
|
27-150milímetro
|
15-260milímetro
|
Corte
|
1.3-3.0milímetro
|
1.3-3.2milímetro
|
Bin yano'ob
|
Carpintería
|
Carpintería
|
Páaybe'en: Ti' personalizado disponible
|
Possible Problems & Solutions
PROBLEM :The surface of the cut board is uneven and deviatesREASON①: Deformation of the wheel surface
PREVENT/SOLVE①: the saw blade rubs against the wheel surface for a long time, and the wheel surface is not trimmed
REASON②: Rolling treatment is not good
PREVENT/SOLVE②: problems in the production of saw blades
REASON③: Angle mismatch
PREVENT/SOLVE③: production process problem, provide specific gravity of cut wood to production
REASON④: The knife
edge is not sharp
PREVENT/SOLVE④: it has not been ground for a long time
REASON⑤: Improper clamp (head) adjustment
PREVENT/SOLVE⑤: excessive clamp clearance
PROBLEM: Saw Blade crackedREASON①: Material Issues PREVENT/SOLVE①:Production Issues
REASON②:The knife edge is not sharp and the resistance is too large PREVENT/SOLVE②:the single use time is determined according to different materials to be cut
REASON③:Tooth profile mismatch PREVENT/SOLVE③:production problem
REASON④:Repair Grinding Cause PREVENT/SOLVE④:Incorrect Grinding
REASON⑤:Bad rolling handling PREVENT/SOLVE⑤:production problem
REASON⑥:Improper blade cooling PREVENT/SOLVE⑥:not cooling properly, or not cooling the bladeproperly
PROBLEM: Saw Blade breakREASON①: Material reason PREVENT/SOLVE①:production problem
REASON②:The knife edge is not sharp, and it has :been used for too long,and the resistance is too large PREVENT/SOLVE②: grind it on time
REASON③:The saw blade is rubbing against the equipment PREVENT/SOLVE③:adjust until the saw blade fits perfectly with the equipment
REASON④:Too much tension PREVENT/SOLVE④:choose thecorresponding tension according to the width and thickness of the saw blade
REASON⑤:The feed speed does not match
PREVENT/SOLVE⑤:according to the cutting of different wood, give the corresponding feed speed
REASON⑥:Human factors PREVENT/SOLVE⑥:wood ash notcleaned in time, grinding is not precise enough, manual feeding speed is uneven, key parts of the machine are regularly lubricated
Embalaje & Naviero
Introducción le empresa
Ba'axten elegir k.
A'alajil t'aan ti' máax ku
Máak Máax ku
|
Emma
|
WhatsApp leti' meyaj ku u nu'ukul t'aan
|
+86 13825289615
|
WeChat (ich inglés).
|
DHcutter
|
Ma' correo electrónico
|
Yik'áalil relacionados
Le' sierra k'axnak'
|
Le' sierra circular
|
Fresa extremo
|
Broca
|
Cortador juntas yaal
|
Cortador espiral helicoidal
|
Cabezal corte
|
Cuchilla cepilladora
|
Koj
|
Máquina yo'osal u meyaj le che'o
|
Comentarios
Láayli' mina'an valoraciones.