In der Metallverarbeitung, Kaltsägen sind zu wesentlichen Werkzeugen für das Präzisionsschneiden aufgrund ihrer hohen Effizienz und geringen thermischen Verformung geworden. Im Gegensatz zu herkömmlichem Schleifschneid, kalte Sägen verwenden kreisförmige Sägeblätter, die sich bei hohen Geschwindigkeiten drehen, um Metallmaterialien in einem kalten Zustand zu scheren, Effektiv vorbeugen, die Arbeitststücksabbau oder dimensionale Ungenauigkeiten durch Wärme verursachen. This article explores the two core types of cold saws—High-Speed Steel (HSS) Cold Saws and Tungsten Carbide-Tipped (TCT) Cold Saws—along with their structural features and operational best practices.
ICH. Two Primary Types of Cold Saws
1. High-Speed Steel (HSS) Kalte Sägen
Made entirely of high-speed steel, these circular saw blades achieve a hardness of HRC 62-65 after specialized heat treatment. Key advantages include:
– Superior Toughness: Ideal for cutting medium-to-low hardness metals (e.g., Aluminium, copper alloys, mild steel), especially in intermittent cutting applications.
– Re-sharpenable Teeth: Teeth can be reground multiple times using professional equipment, extending service life and reducing long-term costs.
– Cost-Effective: Lower initial cost compared to TCT blades, suitable for small-batch or multi-material processing.
2. Tungsten Carbide-Tipped (TCT) Kalte Sägen
Featuring carbide-tipped teeth (tungsten carbide) welded onto alloy steel bodies, these circular saw blades achieve a hardness exceeding HRA 90. Their characteristics include:
– Exceptional Wear Resistance: Designed for high-hardness metals (e.g., Edelstahl, titanium alloys, hardened steel), offering 3-5x higher cutting efficiency than HSS blades.
– Precision Stability: Carbide tips resist deformation, maintaining repeatable cutting accuracy within ±0.1mm.
– High-Speed Compatibility: Operate at 300-600 m/min line speeds, perfect for automated continuous production lines.
II. Key Components of Circular Saw Blades
1. Blade Body
– Material: Spring steel (e.g., 75Cr1, 30CrMo) tempered for rigidity.
– Design: Stress-relief slots minimize vibration during high-speed rotation.
– Diameter Range: Φ200–500mm, compatible with various cutting machines.
2. Zähne
– Geometrie: Alternate Top Bevel (ATB) for improved chip removal or Trapezoidal/Flat (TCG) for thick-walled materials.
– Tooth Count: Thin materials (1–3mm) require 80–120 teeth; thicker materials (>10mm) use 24–40 teeth.
3. Coatings
– HSS Blades: Titanium nitride (TiN) coatings enhance hardness and reduce friction.
– TCT Blades: Diamond coatings extend lifespan by 30% for ultra-hard alloy cutting.
4. Mounting System
– Center Bore: H7 tolerance ensures precise spindle alignment.
– Keyways/Pins: Prevent slippage during operation.
III. Critical Usage Guidelines for Circular Saw Blades
1. Speed and Feed Optimization
– HSS Circular Saw Blades: Maintain line speeds of 80–120 m/min.
– TCT Circular Saw Blades: Operate at 200–400 m/min.
– Adjust feed pressure based on material hardness to avoid tooth chipping.
2. Coolant and Lubrication
– Use water-soluble coolant (5–10% concentration) for cooling and lubrication.
– Direct nozzles toward the cutting zone with a minimum flow rate of 2L/min to prevent chip adhesion.
3. Installation and Maintenance
– Secure flanges with a torque wrench for even clamping force.
– Regularly check radial runout (≤0.02mm); perform dynamic balancing if out of tolerance.
4. Material-Specific Adjustments
– For stainless steel, prioritize TCT blades and reduce feed speed by 30%.
– Add auxiliary clamps for thin-walled tubes to minimize burrs caused by vibration.
IV. Technical Selection Recommendations
– HSS Cold Saws: Best for small-batch, multi-material jobs requiring cost flexibility.
– TCT Cold Saws: Ideal for high-volume, high-hardness cutting to offset initial costs through efficiency gains.
With advancements in coatings and carbide materials, circular saw blades are evolving toward longer lifespans and smart adaptability (e.g., AI-driven speed control). Operators must combine proper blade selection, parameter optimization, and strict adherence to protocols to maximize precision and productivity in metal cutting applications.
