일상 업무에서, 원형톱날을 교체해야 하는 데에는 몇 가지 이유가 있습니다.:
첫 번째, 칼날이 손상되거나 무뎌질 수 있습니다.. 이것은 반드시 교체해야 하는 톱날입니다. 무뎌지거나 부러진 톱을 계속 사용하면 이상적인 평면을 절단하는 데 실패할 뿐만 아니라, 하지만 안전상 위험을 초래할 수도 있습니다.
Or we may need to cut some metal, but our circular saw is equipped with a wood cutting blade, which means a change in cutting materials. Different circular saw for different cutting materials are completely different, so it is very important to follow up on different cutting materials to replace saw blades.
Whatever the reason, when we need to replace saw, what preparations do we need to make and what details do we need to pay attention to? This article will tell you one by one.
·Saw Blade Size
When replacing saw blades, the first important thing we need to know is: what size saw do I need?
Usually when you buy a circular saw, its specific size will be printed on the box and the saw blade itself. You can easily know what size you need through the specifications on the box and the saw blade.
If the box has been lost or the dimensions on the saw blade have worn off unfortunately, then we need to measure the saw blade to find out the specific dimensions. The data we need to measure are the diameter of the saw, the diameter of the arbor, and the number of teeth of the circular saw blade.
첫 번째, we remove the circular saw that needs to be replaced from the saw. The diameter is the measurement from the center of the blade to the other side, and we will use this measurement to purchase a saw that fits the size of the circular saw.
동시에, the hole diameter in the center of the saw blade also needs to fit the shaft or arbor of the circular saw, 즉, we also need to measure the diameter of the arbor hole.
For the number of teeth of the circular saw blade, it depends on the type of material we need to cut. If the cutting material has changed, it is necessary to choose a new and appropriate number of teeth when replacing the saw. 물론, if the saw blade is replaced because the saw is damaged or dull, keep the same number of teeth as the circular saw.
Generally, saw blades with more teeth cut slower, but the cut edges are smoother and edge chipping is less likely to occur. Saw blades with fewer teeth cut faster and usually produce rough, choppy cuts, making them more suitable for roughing or cutting projects that do not require a high surface finish.
· Types of Saw Blades
The type of saw blade you choose depends on the material you are cutting. Wood is the material we most often cut with a saw, and the most common types of cuts we make are longitudinal and transverse cuts.
For different types of cuts, there are different types of saw blades. When changing saw, we need to know exactly what type of saw we need: longitudinal blades have fewer teeth. Usually less than 40. When we look down at the teeth of longitudinal blades, we notice that the top of the teeth is flat. Whereas transverse blades have more teeth. Usually more than 40. When we look at the teeth of transverse blades, we notice that the top of the teeth are “V” shaped or form a valley in the center of the blade.
물론, there are also combination saw, which can cut both longitudinally and transversely.
동시에, the saw used to cut metal, 플라스틱, and concrete are also different. When changing blades, you need to know the type of blade you need to replace in order to perfectly complete the smooth replacement of the blade.
·Direction of the Saw Blade
This is a point that is very easy to overlook during the replacement process: the direction of the saw blade.
Almost all circular saw have an arrow that is printed or engraved on the saw body. This arrow indicates in which direction the saw should be installed on the saw. The arrow needs to point to the front of the circular saw. If we do not see an arrow, the teeth need to face the front of the saw.
·Other Precautions
1-Be sure to tighten the circular saw after replacing it;
Most screws are right-hand threads. This means that the screw can be loosened by turning it to the left and tightened by turning it to the right. You can simply remember it as “tighten on the right and loose on the left”.
If the circular saw uses a left-hand thread screw to fix the blade. This is the opposite of “tighten on the right and loose on the left”. This means that the circular saw screw must be turned to the right to loosen it and turned to the left to tighten it.
2-Disconnect the power supply of the machine when changing the circular saw;
Unplug the circular saw from the socket or remove the battery from the saw. This is very, very important and is related to the safety of the operator, so please remember it.
