Industrial Woodworking Tools Vertical Wood Sawing Bandsaw Blades Log Cutting Carbide TCT Band Saw Blade
Product Introduction
Product Introduction
|
Horizontal
|
Vertical
|
Material
|
Tungsten Carbide
|
Tungsten Carbide
|
TPI
|
15-50mm
|
13-60mm
|
Application
|
Wood
|
Wood
|
Length
|
3500-12000mm
|
3500-15000mm
|
Thickness
|
0.7-1.5mm
|
0.7-1.67mm
|
Width
|
27-150mm
|
15-260mm
|
Kerf
|
1.3-3.0mm
|
1.3-3.2mm
|
Type
|
Woodworking
|
Woodworking
|
Note: Customized service available
|
Possible Problems & Solutions
PROBLEM :The surface of the cut board is uneven and deviatesREASON①: Deformation of the wheel surface
PREVENT/SOLVE①: the saw blade rubs against the wheel surface for a long time, and the wheel surface is not trimmed
REASON②: Rolling treatment is not good
PREVENT/SOLVE②: problems in the production of saw blades
REASON③: Angle mismatch
PREVENT/SOLVE③: production process problem, provide specific gravity of cut wood to production
REASON④: The knife
edge is not sharp
PREVENT/SOLVE④: it has not been ground for a long time
REASON⑤: Improper clamp (head) adjustment
PREVENT/SOLVE⑤: excessive clamp clearance
PROBLEM: Saw Blade crackedREASON①: Material Issues PREVENT/SOLVE①:Production Issues
REASON②:The knife edge is not sharp and the resistance is too large PREVENT/SOLVE②:the single use time is determined according to different materials to be cut
REASON③:Tooth profile mismatch PREVENT/SOLVE③:production problem
REASON④:Repair Grinding Cause PREVENT/SOLVE④:Incorrect Grinding
REASON⑤:Bad rolling handling PREVENT/SOLVE⑤:production problem
REASON⑥:Improper blade cooling PREVENT/SOLVE⑥:not cooling properly, or not cooling the bladeproperly
PROBLEM: Saw Blade breakREASON①: Material reason PREVENT/SOLVE①:production problem
REASON②:The knife edge is not sharp, and it has :been used for too long,and the resistance is too large PREVENT/SOLVE②: grind it on time
REASON③:The saw blade is rubbing against the equipment PREVENT/SOLVE③:adjust until the saw blade fits perfectly with the equipment
REASON④:Too much tension PREVENT/SOLVE④:choose thecorresponding tension according to the width and thickness of the saw blade
REASON⑤:The feed speed does not match
PREVENT/SOLVE⑤:according to the cutting of different wood, give the corresponding feed speed
REASON⑥:Human factors PREVENT/SOLVE⑥:wood ash notcleaned in time, grinding is not precise enough, manual feeding speed is uneven, key parts of the machine are regularly lubricated
Packaging & Shipping
Company Introduction
Why Choose Us
Contact Information
Contact Person
|
Emma
|
WhatsApp/ Phone Number
|
+86 13825289615
|
WeChat
|
DHcutter
|
E-mail Account
|
Related Products
Band Saw Blade
|
Circular Saw Blade
|
End Milling Cutter
|
Drill Bit
|
Finger Joint Cutter
|
Helical Spiral Cutter
|
Cutter Head
|
Planer Knife
|
Grinding Wheel
|
Woodworking Machine
|
Reviews
There are no reviews yet.