The woodworking band saw machine is a high-speed running machine, and the maintenance and upkeep of the machine is very important.
We need to ensure that all parts cannot malfunction when using it, because even a small problem will directly affect the service life of the machine, thereby affecting production efficiency and normal work.
In order to ensure the long-term normal operation and safe operation of the woodworking band saw machine, the machine must be maintained during work. This article will briefly introduce some of the very practical maintenance tips.
First of all, the working area of the band saw machine and the machine tool of the band saw machine must be cleaned frequently and kept tidy.
Because when cutting wood, chips and dust will be produced, and the accumulation of these wood chips will have a very bad impact on the machine. In particular, the resin and wood chips on the band saw blade and saw wheel must be removed, otherwise it will not only affect the The band saw machine itself will also affect the service life of the band saw blade, cutting effect, etc. Therefore, the first step in maintaining a woodworking band saw machine is a clean workspace and a clean band saw machine tool.
Secondly, please pay attention to the parts that frequently generate friction such as bearings, gear screws and slides on the machine tool. These parts need to be lubricated regularly. Keep the machine working smoothly.
At the same time, when the band saw machine is working, the staff can pay attention to whether there are any abnormalities in the rolling bearings of the upper and lower saw wheels of the machine, and the temperature of the rolling bearings cannot exceed 60°C. That is to say, the machine cannot operate for too long.
Woodworkers need to frequently check and calibrate various parts of their machines.
For the saw wheel, you can use the hanging wire method to check whether the upper wheel and the lower saw wheel are on a vertical plane. If there is distortion, it is better to adjust the upper wheel. When the distortion gap is too large, you can also adjust the lower wheel.
And under normal circumstances, after the upper and lower wheels of the saw wheel have been working for a period of time, there will always be some wear and tear. It is necessary to frequently check whether the lifting system of the upper wheel can be flexibly adjusted.
At the same time, you can always check whether the saw card lifting device can slide up and down freely, and whether the automatic tensioning device is flexible and available.
And whether the various parts are damaged, or whether the connecting parts are loose, etc. If abnormal phenomena are found, adjustments should be made in time, and relevant parts should even be replaced to ensure the safe and normal operation of the machine.
34Kw JSM-P37 Vertical Band Saw Mill Full Automatic Band Saw Machine For Wood Production